Enhancing Thermal Efficiency in Water Storage Tanks Using Pigmented Recycled Concrete.

The present work investigated the manufacture of elements such as water tanks from recycled concrete for applications where industries require water heating. This proposal leverages precast rejects for recycled concrete and incorporates colouring pigments. It is expected to contribute to the circularity of construction materials (due to the total replacement of natural aggregates by recycled aggregates) as well as to energy and emissions savings, which are attributed to improved thermal performance driven by the thermal behaviour that the coloration pigment gives to the manufactured concrete elements. To assess the efficacy of the proposed solution, on the one hand, mechanical tests were carried out in tensile, compression and modulus of elasticity, which showed a suitable concrete dosage for HA-30 structural concrete. Simultaneously, in search for a material that would increase the internal temperature of the tanks, thermal tests were carried out in a controlled laboratory environment on samples with different percentages of pigment, and an optimum concentration of 1% was obtained. It was also found that the thermal conductivity remained almost unaffected. Finally, two water tank prototypes were manufactured and tested under real environmental conditions: one with the optimised pigment concentration solution and other (the reference tank) without pigment. The results revealed that the colourised tank with the optimal concentration resulted in an average water temperature increase of 2 °C with respect to the reference tank. Finally, the economic and environmental benefits of this temperature increase were studied for industrial processes requiring water heating with a potential saving of 8625 kWh per month.

Compression and Strain Predictive Models in Non-Structural Recycled Concretes Made from Construction and Demolition Wastes.

This work aims to investigate different predictive models for estimating the unconfined compressive strength and the maximum peak strain of non-structural recycled concretes made up by ceramic and concrete wastes. The extensive experimental campaign carried out during this research includes granulometric analysis, physical and chemical analysis, and compression tests along with the use of the 3D digital image correlation as a method to estimate the maximum peak strain. The results obtained show that it is possible to accurately estimate the unconfined compressive strength for both types of concretes, as well as the maximum peak strain of concretes made up by ceramic waste. The peak strain for mixtures with concrete waste shows lower correlation values.